Wholesale CLANDE® H Series, Replace HARMSCO water filter element factory and manufacturers | Kelandi

CLANDE ®série H, Remplacer l' élément de filtre à eau HARMSCO

Brève description:

CLANDE® H Series High Flow water filter cartridge is  a washable product, it made by polyurethane and polyester. Using imported polyester filter material, high hydrophobic effect, it can be used again after cleaning. The outer diameter is up to 196mm, and the flod height is over 50mm, realizing the perfect combination of super-large filtration area, large flow, long life and high content.It is equipped with high strength nylon frame, which is not easy to deform, and can bear more pressure dif...


  • OD: 7-3/4" (197mm)
  • Length: 9-5/8"(245mm) 19-1/2"(495mm) 30-3/4"(781mm)
  • End Cap: PU,Plastisol
  • Media: Polyester, PP
  • Max, Operating Temp.: 60℃
  • Max. DP: 40 psi

Détail du produit

Mots clés du produit

CLANDE ® H Series High Flow water filter cartridge is  a washable product, it made by polyurethane and polyester. Using imported polyester filter material, high hydrophobic effect, it can be used again after cleaning. The outer diameter is up to 196mm, and the flod height is over 50mm, realizing the perfect combination of super-large filtration area, large flow, long life and high content.It is equipped with high strength nylon frame, which is not easy to deform, and can bear more pressure difference in direction.The end cover is threaded and the joint is soft to ensure the sealing.

 

SPECIFICATION

Diamètre extérieur: 196mm

Initial pressure drop:   0.2bar

Replace the pressure drop    3.4bar/71℃

Max Chute de pression: 3,5 bar / 20 ℃

Max Température de travail: 120 ℃

APPLICATION

 L' eau d' alimentation de filtre centrale électrique

prétraitement de dessalement d' eau de mer

filtration de Condensat

filtration profonde des eaux usées

Piscine filtration de l' eau

récupérée filtration de l' eau

 ORDER INFORMATION

 1565163475(1)

 

 

 


  • Précédent:
  • Next:

  • Écrivez votre message ici et nous l'envoyer