Wholesale CLANDE ® P Series, Replace PALL Ultipleat Series factory and manufacturers | Kelandi

CLANDE ® P Series, Replace PALL Ultipleat Series

Kratki opis:

CLANDE® CHF-PA Series High Flow Water Filter cartridge is made from depth fine PP non-woven fabrics. This filter has a large diameter of 6 inch(152mm) , single open end. The inside to outside flow pattern ensure that all the particles will be intercepted at the inside of the cartridge. FEATURES High filtration area, high flow rate Many rating and lengths are available From the inside to the outside direction to ensure that all  the impurities are trapped inside the cartridge. Large diameter d...


  • O.D.: 6"(152mm)
  • Length: 20"(508mm) 40"(1016mm) 60"(1524mm)
  • Material of Media: PP
  • Material of Cage/Core/End cap: PP
  • O-ring: Silicone, EPDM ,Viton®, E-FKM
  • Max Operating temperature: 80℃(176℉)
  • Max. Opetating DP: 3 bar @21℃

Pojedinosti o proizvodu

Oznake proizvoda

CLANDE ® CHF-PA Series High Flow Water Filter cartridge is made from depth fine PP non-woven fabrics. This filter has a large diameter of 6 inch(152mm) , single open end. The inside to outside flow pattern ensure that all the particles will be intercepted at the inside of the cartridge.

FEATURES

High filtration area, high flow rate
Many rating and lengths are available
From the inside to the outside direction to ensure that all  the impurities are trapped inside the cartridge.
Large diameter design, more pollutants received, keep long service life. Low labor cost.

SPECIFICATION

 

Dimension

OD6“(152mm

Length:20”,40”,60”

Material

Of

Constructions

Media:PP

Cage/Core/End:PP

Performance

Max Operationg Temp.:80

Max Operating DP:3 bar @21

  APPLICATIONS

RO cartridge filtration and seawater desalination pre-treatment
Filtration of condensed water in power plants.
Filtration of bulk drug, solvent, and water in bio-pharmacy industry
Filtration of bottled water, liquid glucose, edible oil, juice, soft drink and milk.
Painting, petrochemical industry
Micro-electronics ,film, fiber, resin

 Order Information

Removal rating

dužina

End style

O-ring Material

Case

Inner Core

CHF-PA

001=1μm

10=10”

Bland=flat E=EPDM Blank=PP case Bland=no core
003=3μm

20=20”

A=Cross Handle B=Buna-N R=Belt A=PP core
005=5μm

30=30”

V=Viton®
010=10μm

40=40”

S=Silicone
025=25μm

60=60”

050=50μm
100=100μm

Example: CHF-PA-50-40-E


  • Prethodna:
  • Sljedeća:

  • Napišite poruku ovdje i pošaljite nam ga