CLANDE® Hydrophilic PTFE Membrane Filter adopts imported Hydrophilic PTFE membrane with expanded Polytetrafluoroethylene (PTFE) membrane, provide superior chemical resistance for a broad range of industrial applications.
Sanitization
Filtered Hot Water 80˚C for 30 min.
Steam Sterilization 121˚C for 30 min., multiple cycles
Chemicals: Cartridges are compatible with most chemical sanitizing agents.
Note: Stainless steel insert option required for all cartridges being hot water sanitized or steam sterilized.
SPECIFICATION
Membrane | Hydrophilic PTFE |
Support Media | Polypropylene |
End Caps | Polypropylene |
Center Core | Polypropylene |
Outer Cage | Polypropylene |
O-Rings/Gaskets | Buna, EPDM, Silicone, Viton, |
Outer Diameter | 2.68inches(68mm) |
Length | 5”,10”,20”,30”,40” |
Change out DP | 35 PSID |
Temperature | 176°F(80°C) |
Max DP | 50PSID(3.4bar)@68°F(20°C) |
ORDER INFORMATION
Series |
Length |
Material |
Rate |
Connection |
O-ring |
PTFE |
5=5” |
HPT=Hydrophilic PTFE |
001=0.01micron |
0=DOE |
B=Buna-N |
10=10” |
010=0.1micron |
1=222+Flat |
E=EPDM |
||
20=20” |
022=0.22micron |
2=222+Fin |
V=Viton |
||
30=30” |
045=0.45micron |
3=226+Flat |
T=Teflon |
||
40=40” |
4=226+fin |
S=Silicon |
Notice: Due to filter has variety in design, please contact with CLANDE sales for more information. |