CLANDE® PES Series Pleated Membrane Filter Cartridge are made of superior quality hydrophilic PES membrane, it has polypropylene support materials. PES membrane filter cartridge use a pleated construction, it has high surface area for filtration. CLANDE PES Series filter cartridge provide excellent flow rates, long service life, wide chemical compatibility.
FEATURES
- Thermal bonding process eliminated adhesives.
- Range of removal rating from 0.1 to 1μm and
- Wide chemical compatibility and be regenerated for long service life.
- High flow rate and low initial pressure loss.
- 100% integrity tested.
SPECIFICATION
Membrane | Polyethersulfone(PES) |
Support Media | Polypropylene |
End Caps | Polypropylene |
Inner core/Center Core | Polypropylene |
End Cap Type | DOE, 215, 222, 226, flat, fin. |
O-ring/Gaskets | Buna, EPDM, Silicone, Viton, |
Outer Diameter | 2.68inches(68mm) |
Length | 5”, 9.75”, 9.8”, 10”,20”,30”,40” |
Change out DP | 2.4bar |
Temperature | 176°F(80°C) |
ORDER INFORMATION
Series |
Length |
Rate |
Connection |
O-ring |
PES |
5=5” |
0022=0.22micron |
0=DOE |
B=Buna-N |
10=10” |
0045=0.45micron |
1=222+Flat |
E=EPDM |
|
20=20” |
00100=1micron |
2=222+Fin |
V=Viton |
|
30=30” |
3=226+Flat |
T=Teflon |
||
40=40” |
4=226+fin |
S=Silicon |
Write your message here and send it to us