Wholesale CLANDE® K Series, Replace PARKER Mega Flow factory and manufacturers | Kelandi

CLANDE ®К серијата, Заменете PARKER Мега Тек

Краток опис:

  SPECIFICATION   CLANDETM K Series High Flow Water Filter Made by pleated HEPA. It extended the service life  of the  filter element, The end cover adopts the axial seal form to  better ensure the product is perpendicular to the link part, making the filter core installation fast and easy to replace.  Unique reinforced internal support  framework  design   enables the filter core to withstand higher pressure  difference. This series of filter is mainly used in RO  pre-filtration and ot...


  • O.D.: 6"(152mm)
  • Length: 20" 40"
  • Material of Media: PP
  • Material of Support: PP
  • End cap Material: Glass Fiber Reinforced PP
  • Material of Seal: Silicone, EPDM ,Viton®, E-FKM
  • Max Operating Temperature: 80℃(176℉)
  • Max. Opetating DP: 3 bar @21℃

детали за производот

Тагови производ

 

SPECIFICATION

  CLANDEТМ K Series High Flow Water Filter Made by pleated HEPA. It extended the service life  of the  filter element, The end cover adopts the axial seal form to  better ensure the product is perpendicular to the link part, making the filter core installation fast and easy to replace.  Unique reinforced internal support  framework  design   enables the filter core to withstand higher pressure  difference. This series of filter is mainly used in RO  pre-filtration and other occasions.

APPLICATION

RO кертриџ пред-филтрација

котловска вода на термоцентралата, кондензат Полирање

морска вода бигор предтретман

напредни третман на фабрика за челик отпадни води

Длабоко третман на отпадни води во фабрика за хартија

Длабоко третман на печатење и боење на отпадни води

и рециклирана вода

Други сајтови со високо филтрирање проток

SPECIFICATION

 Cooperate diameter of axle: Long 100mm(double o-ring,                        Shot:110mm(single o-ring)

 Max pressure drop:4.0Bar

 Максимална температура: 80 ℃

Прецизност: 1μm, 5μm, 10μm, 20μm, 40μm, 70μm, 100μm.

Filter material: Glass fiber, folding PP. Seal material: EPR, NBR, FKM, CR .

Flow rate : 40inch: 30~40 M³/H          60inch:50~70 M³/H

ORDER  INFORMATION

 


  • Претходно:
  • Следно:

  • Напишете ја вашата порака тука и испратете ја на нас